Hypertherm 084026 Power Supply

Part Description

The Hypertherm 084026 is a power supply with control panel SA for current control. It is a component of the Hypertherm Powermax plasma cutting system. The power supply provides the electrical power needed to create the plasma arc, and the control panel allows the operator to control the cutting process.

Specifications

• Input voltage: 208-240 VAC, 50/60 Hz
• Output voltage: 48 VDC
• Output current: 60 A
• Duty cycle: 100% at 40 A, 60% at 60 A
• Dimensions: 17.5" x 11.5" x 9.5" (44.5 x 29.2 x 24.1 cm)
• Weight: 45 lbs (20.4 kg)

Features

• Automatic voltage sensing
• Overvoltage protection
• Overcurrent protection
• Thermal overload protection
• Fan-cooled

Applications

The Hypertherm 084026 power supply is used for plasma cutting a variety of metals, including mild steel, stainless steel, aluminum, and copper. It is ideal for use in industrial applications, such as automotive manufacturing, metal fabrication, and shipbuilding.

Installation

The Hypertherm 084026 power supply should be installed by a qualified technician. The power supply must be connected to a properly grounded electrical outlet. The power supply should be located in a well-ventilated area, away from flammable materials.

Operation

The Hypertherm 084026 power supply is controlled by the control panel SA. The control panel allows the operator to set the cutting current, the cutting speed, and the gas flow rate. The control panel also has a number of indicators that provide information about the status of the power supply and the cutting process.

Maintenance

The Hypertherm 084026 power supply requires minimal maintenance. The power supply should be cleaned periodically with a dry cloth. The fan filter should be cleaned or replaced every six months. The power supply should be inspected annually by a qualified technician.

Troubleshooting

If the Hypertherm 084026 power supply is not working properly, the following troubleshooting steps can be taken:

• Check the power supply connections to make sure they are secure.
• Check the input voltage to make sure it is within the specified range.
• Check the output voltage to make sure it is within the specified range.
• Check the output current to make sure it is within the specified range.
• Check the fan to make sure it is running.
• Check the thermal overload protection to make sure it is not tripped.

If the problem cannot be resolved, the power supply should be taken to a qualified technician for repair.

Conclusion

The Hypertherm 084026 power supply is a reliable and powerful component of the Hypertherm Powermax plasma cutting system. The power supply is easy to install and operate, and it requires minimal maintenance. The power supply is ideal for use in industrial applications, such as automotive manufacturing, metal fabrication, and shipbuilding.