Hypertherm 123668 Lead: Pilot Arc, 35 m/115 ft
Product Description
The Hypertherm 123668 Lead: Pilot Arc, 35 m/115 ft is a genuine Hypertherm replacement part.
Specifications
- Brand: Hypertherm
- Part number: 123668
- Part description: Lead: Pilot Arc, 35 m/115 ft
- Length: 35 m/115 ft
Compatibility
The Hypertherm 123668 is compatible with the following Hypertherm plasma cutters:
- Powermax30 XP
- Powermax45 XP
- Powermax65 XP
- Powermax85 XP
- Powermax105 XP
- Powermax125 XP
Installation
To install the Hypertherm 123668, follow these steps:
- Turn off the plasma cutter and disconnect the power cord.
- Remove the old lead from the plasma cutter.
- Connect the new lead to the plasma cutter.
- Tighten the lead connections.
- Reconnect the power cord and turn on the plasma cutter.
Troubleshooting
If you are experiencing problems with the Hypertherm 123668, please refer to the following troubleshooting tips:
- Check the lead connections to make sure they are tight.
- Check the lead for damage.
- Replace the lead if it is damaged.
Warranty
The Hypertherm 123668 is backed by a 1-year warranty.
Conclusion
The Hypertherm 123668 is a genuine Hypertherm replacement part that is essential for the proper operation of your Hypertherm plasma cutter.
Similar Parts
123820
Lead: HPR Pilot Arc Lead, 3 m/10 ft.
223530
LEAD:XPR PILOT ARC IGNITION 4.5M/14.8' WITH STRAIN RELIEF
023632
Cable Pilot Arc Lead to RHF Console, 50'
223531
Lead: XPR pilot arc ignition 7.5M/24.6' with strain relief
223532
LEAD:XPR PILOT ARC IGNITION 10M/32.8' WITH STRAIN RELIEF
223533
LEAD:XPR PILOT ARC IGNITION 15M/49.2' WITH STRAIN RELIEF
223537
LEAD:XPR PILOT ARC IGNITION 45M/147.6' WITH STRAIN RELIEF
223538
Lead:XPR pilot arc ignition 60M/196.9' w strain relief
223535
Lead:XPR pilot arc ignition 25M/82' with straing relief
223536
LEAD:XPR PILOT ARC IGNITION 35M/114.8' WITH STRAIN RELIEF