Hypertherm 223535 Lead:XPR pilot arc ignition 25M/82' with strain relief

Product Description

The Hypertherm 223535 Lead:XPR pilot arc ignition 25M/82' with strain relief is a high-quality replacement part for Hypertherm plasma cutters.

Features

• 25M/82'
• With strain relief

Compatibility

The Hypertherm 223535 Lead:XPR pilot arc ignition 25M/82' with strain relief is compatible with the following Hypertherm plasma cutters:

• Powermax30 XP
• Powermax45 XP
• Powermax65 XP
• Powermax85 XP
• Powermax105 XP
• Powermax125 XP

Installation

To install the Hypertherm 223535 Lead:XPR pilot arc ignition 25M/82' with strain relief, follow these steps:

1. Disconnect the power supply from the plasma cutter.
2. Remove the old lead from the plasma cutter.
3. Install the new lead by connecting it to the plasma cutter.
4. Reconnect the power supply to the plasma cutter.

Troubleshooting

If you are experiencing problems with the Hypertherm 223535 Lead:XPR pilot arc ignition 25M/82' with strain relief, check the following:

• Make sure that the lead is properly connected to the plasma cutter.
• Check the lead for any damage.
• If the lead is damaged, replace it with a new one.
• If you are still experiencing problems, contact Hypertherm customer service for assistance.