Hypertherm 223532 LEAD:XPR PILOT ARC IGNITION 10M/32.8' WITH STRAIN RELIEF

Product Description

The Hypertherm 223532 LEAD:XPR PILOT ARC IGNITION 10M/32.8' WITH STRAIN RELIEF is a high-quality replacement part for your Hypertherm plasma cutting system. This lead is 10 meters (32.8 feet) long and features a strain relief to protect the cable from damage. It is compatible with the following Hypertherm plasma cutters:

• Powermax30 XP
• Powermax45 XP
• Powermax65 XP
• Powermax85 XP
• Powermax105 XP
• Powermax125 XP

Features

• 10 meters (32.8 feet) long
• Strain relief to protect the cable from damage
• Compatible with Hypertherm Powermax30 XP, Powermax45 XP, Powermax65 XP, Powermax85 XP, Powermax105 XP, and Powermax125 XP plasma cutters

Benefits

• Extends the reach of your plasma cutter
• Protects the cable from damage
• Ensures a reliable connection between your plasma cutter and the torch

Installation

1. Disconnect the power from your plasma cutter.
2. Remove the old lead from the plasma cutter and the torch.
3. Connect the new lead to the plasma cutter and the torch.
4. Reconnect the power to your plasma cutter.

Troubleshooting

If you are experiencing problems with your new lead, please check the following:

• Make sure that the lead is properly connected to the plasma cutter and the torch.
• Make sure that the lead is not damaged.
• Make sure that the plasma cutter is turned on and set to the correct cutting mode.
• If you are still experiencing problems, please contact Hypertherm customer service for assistance.

Conclusion

The Hypertherm 223532 LEAD:XPR PILOT ARC IGNITION 10M/32.8' WITH STRAIN RELIEF is a high-quality replacement part that will extend the reach of your plasma cutter and protect the cable from damage. It is easy to install and comes with a one-year warranty.