Hypertherm 104440 BRACKET:LIFTER LASER POINTER

Product Details

• Brand: Hypertherm
• Part Number: 104440
• Description: BRACKET:LIFTER LASER POINTER
• Weight: 0.25 lbs
• Dimensions: 3.00" x 2.00" x 1.00"

Product Features

• Made from durable materials for long life
• Easy to install and use
• Backed by Hypertherm's warranty

Compatibility

The Hypertherm 104440 BRACKET:LIFTER LASER POINTER is compatible with the following Hypertherm plasma cutters:

• Powermax30 XP
• Powermax45 XP
• Powermax65 XP
• Powermax85 XP
• Powermax105 XP
• Powermax125 XP

Installation

The Hypertherm 104440 BRACKET:LIFTER LASER POINTER can be installed easily by following these steps:

1. Turn off the plasma cutter and disconnect the power cord.
2. Remove the old bracket from the plasma cutter.
3. Install the new bracket using the supplied hardware.
4. Reconnect the power cord and turn on the plasma cutter.

Troubleshooting

If you are experiencing problems with the Hypertherm 104440 BRACKET:LIFTER LASER POINTER, please refer to the following troubleshooting tips:

• Check the bracket for damage. If the bracket is damaged, it must be replaced.
• Make sure the bracket is installed correctly. The bracket must be installed securely to the plasma cutter.
• Check the laser pointer for damage. If the laser pointer is damaged, it must be replaced.
• Make sure the laser pointer is properly aligned. The laser pointer must be aligned with the plasma cutter's nozzle.

If you are still experiencing problems, please contact Hypertherm customer support for assistance.

Warranty

The Hypertherm 104440 BRACKET:LIFTER LASER POINTER is backed by Hypertherm's warranty. For more information on Hypertherm's warranty, please visit their website.