Monthly Basis
What's happening this month?

Hypertherm 128279 Command THC Torch Bracket

Part Description

The Hypertherm 128279 Command THC Torch Bracket is a mounting bracket for the Hypertherm 120597 2" diameter torch. It is used to attach the torch to the Command THC torch height control system. The bracket is made of steel and has a black oxide finish.

Features

  • Mounts the Hypertherm 120597 2" diameter torch to the Command THC torch height control system
  • Made of steel with a black oxide finish
  • Easy to install

Specifications

  • Part Number: 128279
  • Brand: Hypertherm
  • Material: Steel
  • Finish: Black oxide
  • Weight: 1 lb.
  • Dimensions: 6" x 4" x 2"

Installation

  1. Mount the Command THC torch height control system to the plasma cutting table.
  2. Attach the Hypertherm 128279 Command THC Torch Bracket to the Command THC torch height control system.
  3. Insert the Hypertherm 120597 2" diameter torch into the Hypertherm 128279 Command THC Torch Bracket.
  4. Tighten the screws on the Hypertherm 128279 Command THC Torch Bracket to secure the torch.

Maintenance

The Hypertherm 128279 Command THC Torch Bracket requires no maintenance.

Troubleshooting

If the Hypertherm 128279 Command THC Torch Bracket is not working properly, check the following:

  • Make sure that the Hypertherm 128279 Command THC Torch Bracket is properly mounted to the Command THC torch height control system.
  • Make sure that the Hypertherm 120597 2" diameter torch is properly inserted into the Hypertherm 128279 Command THC Torch Bracket.
  • Make sure that the screws on the Hypertherm 128279 Command THC Torch Bracket are tight.

If the Hypertherm 128279 Command THC Torch Bracket is still not working properly, contact Hypertherm Technical Support for assistance.

Similar Parts

020046
Torch mounting bracket for 2" diameter sleeve.

041509
Power Supply for a THC Command Use Part #229155

128606
Command THC Lifter Assembly with double rails- use to be 128050

128654
obsolete USE PART # 128239 Bullet replacement kit for torch -USE PART # 128239

128277
Mounting block kit for 1-3/8" diameter torch

104269
SPANNER WRENCH: 2 INCH DIAMETER FOR HPR

104879
SPANNER WRENCH 2.25 INCH DIAMETER X 6.25 INCH LONG XPR SYSTEMS

228591
KIT:LIFTER ASSEMBLY:5MM PITCH 10MM DIAMETER 9.45" STRK SEALED

027574
USE PART # 97505-C1055A BRK-AWAY:C-THC GNRC

123022
Lifter I/O interface cable, Command THC, 25 ft.