Hypertherm 120546 Bracket for HT2000 LHF Off Valve
Part Description
The Hypertherm 120546 bracket is used to mount the HT2000 LHF off valve. It is made of steel and has a black oxide finish. The bracket has two mounting holes and two slots for the valve.
Specifications
- Brand: Hypertherm
- Part Number: 120546
- Description: Bracket for HT2000 LHF Off Valve
- Material: Steel
- Finish: Black oxide
- Mounting Holes: 2
- Slots for Valve: 2
Installation
To install the Hypertherm 120546 bracket, follow these steps:
- Locate the mounting location. The bracket should be mounted on a flat surface near the HT2000 LHF off valve.
- Mark the mounting holes. Use a pencil to mark the location of the two mounting holes on the surface.
- Drill the mounting holes. Drill two holes at the marked locations.
- Attach the bracket. Use two bolts and nuts to attach the bracket to the surface.
- Install the valve. Insert the HT2000 LHF off valve into the slots on the bracket.
Maintenance
The Hypertherm 120546 bracket does not require any maintenance. However, it should be inspected regularly for signs of wear or damage. If the bracket is damaged, it should be replaced immediately.
Warranty
The Hypertherm 120546 bracket is covered by a one-year warranty. If the bracket fails within one year of purchase, it will be replaced free of charge.
Similar Parts
123285
CABLE:HT2000 LHF PWR SPLY/OFF-V 25'
041246
HT2000 LHF Relay PCB
123321
Cable for HT2000 LHF
041764
PCB ASSY:HT2000 LHF CONTROL BOARD
073263
HT2000 LHF Power Supply, 440V, CE, 50-60 Hz, w/o THC
123185
Off Valve to motor valve cable 4 X 2
006109
Solenoid Valve for HPR/HD4070 for an Off Valve Assembly SV1 and SV2, SV4-SV9, SV11-SV16
120832
Bracket, HT2000, 2" sleeve with brassfittings
129470
OFF-V SA:HT2000-SST MACH TCH
078194
HSD130 LHF PWR SPLY 200V