Monthly Basis
What's happening this month?

Hypertherm 104436 PLATE:LIFTER TORCH ADAPTER

Product Description

The Hypertherm 104436 PLATE:LIFTER TORCH ADAPTER is a genuine Hypertherm product that is designed to connect a Hypertherm plasma torch to a lifter. This adapter is made of durable materials that are designed to withstand the harsh conditions of plasma cutting. The 104436 PLATE:LIFTER TORCH ADAPTER is easy to install and use, and it is backed by Hypertherm's warranty.

Features

  • Connects a Hypertherm plasma torch to a lifter
  • Made of durable materials that are designed to withstand the harsh conditions of plasma cutting
  • Easy to install and use
  • Backed by Hypertherm's warranty

Specifications

  • Part number: 104436
  • Brand: Hypertherm
  • Product type: PLATE:LIFTER TORCH ADAPTER
  • Material: Stainless steel
  • Weight: 0.5 lbs
  • Dimensions: 3" x 2" x 1"

Compatibility

The Hypertherm 104436 PLATE:LIFTER TORCH ADAPTER is compatible with the following Hypertherm plasma torches:

  • Powermax30 XP
  • Powermax45 XP
  • Powermax65 XP
  • Powermax85 XP
  • Powermax105 XP
  • Powermax125 XP

Installation

The Hypertherm 104436 PLATE:LIFTER TORCH ADAPTER is easy to install. Simply follow these steps:

  1. Remove the torch from the lifter.
  2. Attach the adapter to the lifter.
  3. Reattach the torch to the adapter.

Use

To use the Hypertherm 104436 PLATE:LIFTER TORCH ADAPTER, simply follow these steps:

  1. Place the workpiece on the cutting table.
  2. Position the torch over the workpiece.
  3. Start cutting.

Maintenance

The Hypertherm 104436 PLATE:LIFTER TORCH ADAPTER requires minimal maintenance. Simply clean the adapter with a dry cloth after each use.

Troubleshooting

If you are experiencing problems with the Hypertherm 104436 PLATE:LIFTER TORCH ADAPTER, please refer to the following troubleshooting guide:

  • Check the connections between the adapter and the torch and the lifter.
  • Make sure that the adapter is properly installed.
  • Clean the adapter with a dry cloth.
  • If the problem persists, contact Hypertherm customer support.

Warranty

The Hypertherm 104436 PLATE:LIFTER TORCH ADAPTER is backed by Hypertherm's warranty. For more information, please visit the Hypertherm website.

Similar Parts

104433
PLATE:LIFTER MOUNTING

MECO-0119
Murr 4 Hole Cable Clamp Plate

020407
Adapter for 2" torch sleeve to 1 3/4" torch for Max 200 / HT2000

058224
O-Ring - on torch adapter

428934
Cartridge:SmartSYNC or Adapter 85 A Mechanized Cutting

229829
ASSEMBLY:PLASMA INTERFACE ETHERCAT HPR PCB 223478, cable adapter

428447
HPR400XD ETHERCAT ADAPTER KIT EtherCat PCB, VDC3, Wire Harness, Etc....

428489
KIT:HPR130/260 INTERFACE ETHERCAT ADAPTER

51025K324
1/4" to 10/32" Brass Instant Tube Fitting Male Straight Adapter OD, w/o o-ring

428935
Cartridge:SmartSYNC or Adapter 85 A Drag Cutting