Hypertherm 806320 Instruction Manual

Table of Contents

• Introduction
• Safety Precautions
• Installation
• Operation
• Maintenance
• Troubleshooting
• Warranty

Introduction

The Hypertherm 806320 Instruction Manual provides detailed instructions on how to safely and effectively install, operate, and maintain the Hypertherm 806320 plasma cutting system. This manual should be read and understood by all personnel who will be working with the system.

Safety Precautions

The Hypertherm 806320 plasma cutting system is a powerful tool that can be dangerous if not used properly. The following safety precautions must be followed at all times:

• Always wear proper safety gear, including eye protection, hearing protection, and gloves.
• Never operate the system in a flammable or explosive atmosphere.
• Keep the system away from children and pets.
• Do not touch the torch or workpiece while the system is in operation.
• Allow the system to cool down completely before performing maintenance.

Installation

The Hypertherm 806320 plasma cutting system must be installed by a qualified technician. The following steps provide a general overview of the installation process:

1. Choose a location for the system that is well-ventilated and free from flammable or explosive materials.
2. Mount the system on a stable surface that can support its weight.
3. Connect the system to a power source.
4. Connect the system to a compressed air source.
5. Connect the torch to the system.
6. Connect the workpiece to the system.

Operation

The Hypertherm 806320 plasma cutting system is a versatile tool that can be used to cut a variety of metals. The following steps provide a general overview of the operating process:

1. Turn on the system.
2. Select the desired cutting mode.
3. Set the desired cutting parameters.
4. Position the torch over the workpiece.
5. Start cutting.
6. Move the torch along the desired cutting path.
7. Stop cutting.

Maintenance

The Hypertherm 806320 plasma cutting system requires regular maintenance to keep it operating properly. The following steps provide a general overview of the maintenance process:

1. Clean the system after each use.
2. Inspect the system for damage.
3. Replace any damaged parts.
4. Lubricate the system according to the manufacturer's instructions.
5. Calibrate the system according to the manufacturer's instructions.

Troubleshooting

The Hypertherm 806320 plasma cutting system may experience problems from time to time. The following steps provide a general overview of the troubleshooting process:

1. Check the power supply.
2. Check the compressed air supply.
3. Check the torch.
4. Check the workpiece.
5. Check the system settings.
6. Contact a qualified technician for assistance.

Warranty

The Hypertherm 806320 plasma cutting system is backed by a warranty. For details, please see the warranty document that came with your system.