Hypertherm 428242 KIT:ARCGLIDE LIFTER OHMIC CONTACT WIRE

Product Description

The Hypertherm 428242 KIT:ARCGLIDE LIFTER OHMIC CONTACT WIRE is a genuine Hypertherm replacement part.

Specifications

• Brand: Hypertherm
• Part number: 428242
• Part description: KIT:ARCGLIDE LIFTER OHMIC CONTACT WIRE

Compatibility

The Hypertherm 428242 KIT:ARCGLIDE LIFTER OHMIC CONTACT WIRE is compatible with the following Hypertherm plasma cutters:

• Powermax30 XP
• Powermax45 XP
• Powermax65 XP
• Powermax85 XP
• Powermax105 XP
• Powermax125 XP

Installation

To install the Hypertherm 428242 KIT:ARCGLIDE LIFTER OHMIC CONTACT WIRE, follow these steps:

1. Turn off the plasma cutter and disconnect the power cord.
2. Remove the old ohmic contact wire.
3. Install the new ohmic contact wire.
4. Reconnect the power cord and turn on the plasma cutter.

Troubleshooting

If you are experiencing problems with the Hypertherm 428242 KIT:ARCGLIDE LIFTER OHMIC CONTACT WIRE, please refer to the following troubleshooting tips:

• Check the ohmic contact wire for damage.
• Make sure the ohmic contact wire is properly installed.
• Clean the ohmic contact wire and the surrounding area.
• If the problem persists, contact Hypertherm technical support.