Hypertherm 428167 KIT:MAXPRO200 CONTROL PRINTED CIRCUIT BOARD ASSEMBLY

Product Description

The Hypertherm 428167 KIT:MAXPRO200 CONTROL PRINTED CIRCUIT BOARD ASSEMBLY is a replacement part for the Hypertherm MaxPro200 plasma cutter. This assembly includes the printed circuit board, all necessary components, and instructions for installation.

Features

• Direct replacement for the Hypertherm 428167 KIT:MAXPRO200 CONTROL PRINTED CIRCUIT BOARD ASSEMBLY
• Includes all necessary components and instructions for installation
• Backed by Hypertherm's warranty

Specifications

• Brand: Hypertherm
• Part number: 428167
• Part description: KIT:MAXPRO200 CONTROL PRINTED CIRCUIT BOARD ASSEMBLY
• Weight: 1 lb
• Dimensions: 6 x 4 x 2 in

Compatibility

The Hypertherm 428167 KIT:MAXPRO200 CONTROL PRINTED CIRCUIT BOARD ASSEMBLY is compatible with the following Hypertherm plasma cutters:

• MaxPro200

Installation

The Hypertherm 428167 KIT:MAXPRO200 CONTROL PRINTED CIRCUIT BOARD ASSEMBLY can be installed by following these steps:

1. Disconnect the power supply from the plasma cutter.
2. Remove the side panel of the plasma cutter.
3. Locate the old control printed circuit board assembly.
4. Remove the old control printed circuit board assembly by disconnecting the wires and unscrewing the mounting screws.
5. Install the new control printed circuit board assembly by connecting the wires and screwing in the mounting screws.
6. Replace the side panel of the plasma cutter.
7. Reconnect the power supply to the plasma cutter.

Troubleshooting

If the Hypertherm 428167 KIT:MAXPRO200 CONTROL PRINTED CIRCUIT BOARD ASSEMBLY is not working properly, you can try the following troubleshooting steps:

1. Check the connections between the control printed circuit board assembly and the other components of the plasma cutter.
2. Check the fuses on the control printed circuit board assembly.
3. Replace the control printed circuit board assembly.

If you are still experiencing problems, you can contact Hypertherm customer support for assistance.

Warranty

The Hypertherm 428167 KIT:MAXPRO200 CONTROL PRINTED CIRCUIT BOARD ASSEMBLY is backed by Hypertherm's warranty. For more information, please see the Hypertherm website.

Similar Parts

428750
KIT:XPR CONTROL PRINTED CIRCUIT BOARD ASSEMBLY WITH WIFI TAG

228577
KIT:PRINTED CIRCUIT BOARD ASSEMBLY THC CONTROL INTERFACE

228460
KIT:PRINTED CIRCUIT BOARD ASSEMBLY 230V SURGE BOARD

041938
PRINTED CIRCUIT BOARD ASSEMBLY:HSD CONTROL

141368
PRINTED CIRCUIT BOARD ASSEMBLY:XPR OHMIC CONTROL

428004
KIT:PRINTED CIRCUIT BOARD ASSEMBLY LUM MCC-SIX AXIS

428003
KIT:PRINTED CIRCUIT BOARD ASSEMBLY EDGE PRO TI DC SERVO

428002
KIT:PRINTED CIRCUIT BOARD ASSEMBLY RELAY I/O EDGE PRO TI

228580
KIT:PRINTED CIRCUIT BOARD ASSEMBLY LIFTER INTERFACE

428001
KIT:PRINTED CIRCUIT BOARD ASSEMBLY UTILITY SERIAL ISOLATION