Hypertherm 420291 SHIELD ASSEMBLY:XPR 40 AMPS NON-FERROUS

Product Description

The Hypertherm 420291 SHIELD ASSEMBLY:XPR 40 AMPS NON-FERROUS is a replacement part for Hypertherm XPR plasma cutters. This shield assembly is designed to protect the torch from damage and to improve cutting performance.

Features

• Protects the torch from damage
• Improves cutting performance
• Easy to install

Specifications

• Brand: Hypertherm
• Part number: 420291
• Part description: SHIELD ASSEMBLY:XPR 40 AMPS NON-FERROUS
• Material: Stainless steel
• Dimensions: 4" x 4" x 4"
• Weight: 1 lb.

Compatibility

This shield assembly is compatible with the following Hypertherm XPR plasma cutters:

• XPR170
• XPR300
• XPR300XT
• XPR400
• XPR400XT

Installation

To install this shield assembly, follow these steps:

1. Turn off the power to the plasma cutter.
2. Remove the old shield assembly.
3. Install the new shield assembly.
4. Tighten the screws.
5. Turn on the power to the plasma cutter.

Troubleshooting

If you are experiencing problems with this shield assembly, please refer to the following troubleshooting tips:

• Check the shield assembly for damage.
• Make sure the shield assembly is properly installed.
• Clean the shield assembly.
• Replace the shield assembly.

Conclusion

The Hypertherm 420291 SHIELD ASSEMBLY:XPR 40 AMPS NON-FERROUS is a high-quality replacement part that will help to protect your torch from damage and improve cutting performance. This shield assembly is easy to install and compatible with a variety of Hypertherm XPR plasma cutters.