Hypertherm 229882 Relay Subassembly

Part Description

The Hypertherm 229882 relay subassembly is a high-voltage relay used in XPR plasma cutting systems. It is responsible for controlling the flow of high-voltage current to the plasma torch. The relay subassembly consists of a relay, a capacitor, and a resistor. The relay is a magnetically operated switch that opens and closes the circuit to the plasma torch. The capacitor and resistor are used to suppress electrical noise and protect the relay from damage.

Part Number

The part number for the Hypertherm 229882 relay subassembly is 229882.

Brand

Hypertherm is a leading manufacturer of plasma cutting systems and consumables. The company was founded in 1968 in Hanover, New Hampshire. Hypertherm's products are used in a variety of industries, including metal fabrication, automotive, and aerospace.

Applications

The Hypertherm 229882 relay subassembly is used in the following XPR plasma cutting systems:

• XPR100
• XPR200
• XPR300
• XPR400
• XPR500

Specifications

The Hypertherm 229882 relay subassembly has the following specifications:

• Voltage: 240 VAC
• Current: 10 A
• Power: 2.4 kW
• Frequency: 50/60 Hz
• Weight: 0.5 lb
• Dimensions: 3.5" x 2.5" x 1.5"

Installation

The Hypertherm 229882 relay subassembly is installed in the following way:

1. Disconnect the power supply from the plasma cutting system.
2. Remove the cover from the plasma cutting system.
3. Locate the relay subassembly.
4. Remove the old relay subassembly.
5. Install the new relay subassembly.
6. Replace the cover on the plasma cutting system.
7. Reconnect the power supply to the plasma cutting system.

Troubleshooting

If the Hypertherm 229882 relay subassembly is not working, the following troubleshooting steps can be performed:

1. Check the power supply to the plasma cutting system.
2. Check the connections between the relay subassembly and the plasma cutting system.
3. Check the relay subassembly for damage.
4. If the relay subassembly is damaged, replace it with a new one.

Conclusion

The Hypertherm 229882 relay subassembly is an important part of the XPR plasma cutting system. It is responsible for controlling the flow of high-voltage current to the plasma torch. By following the installation and troubleshooting steps outlined in this document, you can ensure that the relay subassembly is functioning properly.