Monthly Basis
What's happening this month?

Hypertherm 229212 Inductor Subassembly

Part Description

The Hypertherm 229212 Inductor Subassembly is a component of the HPR400XD plasma cutter. It is responsible for generating the high-frequency current that is used to create the plasma arc. The subassembly consists of a coil, a core, and a capacitor. The coil is made of copper wire, and it is wound around the core. The core is made of iron, and it helps to concentrate the magnetic field generated by the coil. The capacitor is used to store energy, and it helps to create a high-frequency current.

Specifications

  • Part Number: 229212
  • Brand: Hypertherm
  • Description: Inductor Subassembly
  • Weight: 0.5 lbs
  • Dimensions: 3" x 2" x 1"

Compatibility

The Hypertherm 229212 Inductor Subassembly is compatible with the following plasma cutters:

  • Hypertherm HPR400XD

Installation

The Hypertherm 229212 Inductor Subassembly can be installed by following these steps:

  1. Disconnect the power supply from the plasma cutter.
  2. Remove the side panel of the plasma cutter.
  3. Locate the inductor subassembly.
  4. Remove the old inductor subassembly.
  5. Install the new inductor subassembly.
  6. Replace the side panel of the plasma cutter.
  7. Reconnect the power supply to the plasma cutter.

Troubleshooting

If the Hypertherm 229212 Inductor Subassembly is not working properly, there are a few things you can check:

  • Check the connections between the inductor subassembly and the plasma cutter.
  • Check the inductor subassembly for damage.
  • Check the capacitor for damage.
  • If the inductor subassembly is still not working properly, you may need to replace it.

Conclusion

The Hypertherm 229212 Inductor Subassembly is an important component of the HPR400XD plasma cutter. It is responsible for generating the high-frequency current that is used to create the plasma arc. By following the steps in this document, you can install and troubleshoot the inductor subassembly.

Similar Parts

229653
Harness: HPR400 pump motor drive board power replacement

141027
PRINTED CIRCUIT BOARD ASSEMBLY:HPR PUMP MOTOR DRIVE PCB7 ***DOUBLE CHECK HARNESS 22965...

428845
KIT:INDUCTOR SUBASSEMBLY:XPR300 100 AMPS 650 MICROHENRIES COUPLED DISK WOUND 2

009320
Inductor

014373
INDUCTOR:MAXPRO200 POWER SUPPLY

123205
Motor Drive Cable for Command THC, 75 feet

123202
Motor drive Cable, 35 ft. / 10.6 m

123201
Motor Drive Cable, 30 ft.

123200
Motor Drive Cable - 20 ft.

123021
Motor Drive Cables, 50 ft. command thc system