Monthly Basis
What's happening this month?

Hypertherm 228539

Part Description

KIT:PMX65/85/105/125 UPGRADE SERIAL INTERFACE PORT RS-485

Brand

Hypertherm

Part Number

228539

Features

  • Upgrade kit for Hypertherm PMX65, PMX85, PMX105, and PMX125 plasma cutters
  • Adds an RS-485 serial interface port to the plasma cutter
  • Allows the plasma cutter to be connected to a computer or other device for control and monitoring
  • Includes all necessary hardware and instructions

Benefits

  • Increased productivity: The RS-485 serial interface port allows the plasma cutter to be connected to a computer or other device for control and monitoring, which can help to improve productivity.
  • Reduced downtime: The RS-485 serial interface port can help to reduce downtime by providing a way to quickly and easily troubleshoot problems.
  • Improved accuracy: The RS-485 serial interface port can help to improve accuracy by providing a way to precisely control the plasma cutter's operation.

Applications

  • The Hypertherm 228539 KIT:PMX65/85/105/125 UPGRADE SERIAL INTERFACE PORT RS-485 is ideal for use in a variety of applications, including:
  • Metal fabrication
  • Automotive repair
  • Construction
  • Mining
  • Shipbuilding

Specifications

  • Power requirements: 115 VAC, 50/60 Hz
  • Maximum baud rate: 115,200 bps
  • Data format: 8 data bits, 1 stop bit, no parity
  • Cable length: 10 feet (3 meters)

Installation

The Hypertherm 228539 KIT:PMX65/85/105/125 UPGRADE SERIAL INTERFACE PORT RS-485 can be installed by a qualified technician. The installation process typically involves the following steps:

  1. Disconnect the power from the plasma cutter.
  2. Remove the cover from the plasma cutter.
  3. Locate the RS-485 serial interface port on the plasma cutter.
  4. Connect the RS-485 serial interface cable to the plasma cutter.
  5. Connect the other end of the RS-485 serial interface cable to the computer or other device.
  6. Replace the cover on the plasma cutter.
  7. Restore power to the plasma cutter.

Troubleshooting

If you are experiencing problems with the Hypertherm 228539 KIT:PMX65/85/105/125 UPGRADE SERIAL INTERFACE PORT RS-485, you can try the following troubleshooting steps:

  1. Check the connections between the plasma cutter and the computer or other device.
  2. Make sure that the RS-485 serial interface port is enabled on the plasma cutter.
  3. Check the baud rate and data format settings on the plasma cutter and the computer or other device.
  4. Try using a different RS-485 serial interface cable.
  5. Contact Hypertherm for technical support.

Similar Parts

228697
KIT:PMX65/85 UPGRADE CPC PORT W/SELECTABLE VOLTAGE RATIO

083267
PMX65 CSA 200-600V POWER SUPPLY 65A WITH 14-PIN CPC PORT VOLTAGE-DIVIDER BOARD/SERIAL IN...

228687
KIT:PMX65/85/105/125 VALVE SUBASSEMBLY

228695
KIT:PMX65/85/105/125 AIR FILTER ELEMENT

428351
KIT:PMX65/85/105/125 FILTER SUB-ASSEMBLY W/CLEAR BOWL

228685
KIT:PMX65/85/105/125 FILTER SUBASSEMBLY

228688
KIT:PMX30/30XP/65/85/105/125 PRESS SWITCH

083373
PMX65 SYNC CSA 208v - 600v CPC+ voltage divider + serial

083305
PMX65 CSA MACHINE SYSTEM 200-600V/CPC/SERIAL/180° TORCH/RING LEAD 50'

228716
KIT:DURAMAX MACHINE TORCH MAIN BODY PMX65-105