Monthly Basis
What's happening this month?

Hypertherm 228463 KIT:PUSHBUTTON SWITCH ASSEMBLY WHITE MOM NO

Product Description

The Hypertherm 228463 KIT:PUSHBUTTON SWITCH ASSEMBLY WHITE MOM NO is a genuine Hypertherm replacement part. This kit includes the following components:

  • (1) Pushbutton Switch Assembly
  • (1) White MOM NO Button
  • (1) Mounting Bracket
  • (1) Set of Screws

This kit is used to replace the pushbutton switch assembly on Hypertherm plasma cutters. The pushbutton switch assembly is located on the front panel of the plasma cutter and is used to control the power to the unit. The white MOM NO button is a momentary-on, normally-open button. This type of button is typically used for momentary control of a device, such as a plasma cutter.

Installation Instructions

To install the Hypertherm 228463 KIT:PUSHBUTTON SWITCH ASSEMBLY WHITE MOM NO, follow these steps:

  1. Disconnect the power to the plasma cutter.
  2. Remove the old pushbutton switch assembly from the plasma cutter.
  3. Install the new pushbutton switch assembly into the plasma cutter.
  4. Secure the pushbutton switch assembly with the mounting bracket and screws.
  5. Reconnect the power to the plasma cutter.

Troubleshooting

If the pushbutton switch assembly is not working properly, check the following:

  • The pushbutton switch assembly is properly installed.
  • The wiring connections are correct.
  • The power to the plasma cutter is turned on.
  • The plasma cutter is properly grounded.

If the pushbutton switch assembly is still not working properly, contact Hypertherm Technical Support for assistance.

Warranty

The Hypertherm 228463 KIT:PUSHBUTTON SWITCH ASSEMBLY WHITE MOM NO is covered by a one-year warranty. For more information on the warranty, please see the Hypertherm website.

Conclusion

The Hypertherm 228463 KIT:PUSHBUTTON SWITCH ASSEMBLY WHITE MOM NO is a genuine Hypertherm replacement part. This kit is used to replace the pushbutton switch assembly on Hypertherm plasma cutters. The installation process is simple and straightforward. If you have any questions or concerns, please contact Hypertherm Technical Support for assistance.

Similar Parts

228468
KIT:PUSHBUTTON SWITCH ASSEMBLY EDGE PRO RED

228467
KIT:PUSHBUTTON SWITCH ASSEMBLY EDGE PRO GREEN

428026
KIT:SWITCH PUSHBUTTON GREEN W/LATCH W/NORMALLY OPEN CONTACT BLOCK

005688
PUSHBUTTON SWITCH:RED EXTENDED BLACK BEZEL MOMENTARY NORMALLY OPEN

005689
PUSHBUTTON SWITCH:GREEN FLUSH BLACK BEZEL MOMENTARY NORMALLY OPEN

005089
LENS: WHITE FOR 005088

108732
USE NEW PART # 428142 KNOB:.830 DIA 6MM "D" SFT BLACK/WHITE

003184
CIRCUIT BREAKER: 3PHASE 1AMP W/TC WHITE HANDLE

228469
KIT:TOGGLE SWITCH ASSEMBLY EDGE PRO

029326
Coolant level switch assembly for Max200