Hypertherm 220742
Part description
SHIELD:HPR400 130A BEVEL MS
Compatibility
This shield is compatible with the following Hypertherm plasma cutters:
- HPR400XD
- HPR400XP
- HPR400XPR
- HPR400XPR-D
Specifications
- Material: Stainless steel
- Thickness: 0.062" (1.6 mm)
- Height: 1.5" (38.1 mm)
- Width: 3.5" (88.9 mm)
Installation
- Remove the old shield.
- Clean the area around the torch head.
- Apply a thin layer of thermal paste to the back of the new shield.
- Align the shield with the torch head and install the screws.
- Tighten the screws until the shield is secure.
Maintenance
- Inspect the shield for damage before each use.
- Replace the shield if it is damaged.
- Clean the shield with a mild detergent and water after each use.
Troubleshooting
If the shield is damaged, it may cause the following problems:
- The plasma arc may be unstable.
- The plasma arc may wander.
- The cut quality may be poor.
If you experience any of these problems, replace the shield.
Similar Parts
220747
CAP:HPR400 130A SHIELD RETAINER
020415
ELECTRODE:MAX200/HSD/HyPro2000/MAXPRO200 100A H35-130A H35-130A N2-200AH35-200A N2
220738
SHIELD:HPR400 260A BEVEL STAINLESS STEEL
220741
SHIELD:HPR400 260A BEVEL MS
220645
SHLD:HPR 130A MS BEVEL
220646
NOZ:HPR 130A MS BEVEL
220649
ELCTD:HPR 130A MS BEVEL
220656
NOZZLE:HPR 130A STAINLESS STEEL BEVEL
220794
CAP:HPR400 260A BEVEL NOZZLE RET MS COUNTER-CLOCKWISE
220740
CAP:HPR400 260A BEVEL NOZZLE RETAINING MS