Hypertherm 120929 PowerMax 1250 Shield, Hand Cutting

Product Description

The Hypertherm 120929 PowerMax 1250 Shield, Hand Cutting is a high-quality replacement part for your Hypertherm PowerMax 1250 plasma cutter. This shield is designed to protect the torch from damage and extend the life of your cutting system.

Features

• Made from durable materials for long life
• Protects the torch from damage
• Extends the life of your cutting system

Specifications

• Brand: Hypertherm
• Part number: 120929
• Part description: PowerMax 1250 Shield, Hand Cutting
• Dimensions: 3.5" x 3.5" x 1"
• Weight: 0.5 lbs

Compatibility

The Hypertherm 120929 PowerMax 1250 Shield, Hand Cutting is compatible with the following Hypertherm plasma cutters:

• PowerMax 1250
• PowerMax 1250G
• PowerMax 1250XP
• PowerMax 1250XT

Installation

The Hypertherm 120929 PowerMax 1250 Shield, Hand Cutting can be installed easily by following these steps:

1. Turn off the plasma cutter and disconnect the power cord.
2. Remove the old shield from the torch.
3. Install the new shield on the torch.
4. Tighten the screws to secure the shield in place.
5. Reconnect the power cord and turn on the plasma cutter.

Safety Precautions

When working with a plasma cutter, it is important to take the following safety precautions:

• Wear proper protective clothing, including a welding helmet, gloves, and long sleeves.
• Ensure that the area is well-ventilated and free of flammable materials.
• Keep the plasma cutter away from water and other sources of moisture.
• Never touch the torch or the workpiece while the plasma cutter is in operation.

Troubleshooting

If you are experiencing problems with your Hypertherm PowerMax 1250 plasma cutter, the following troubleshooting tips may help:

• Check the shield for damage and replace it if necessary.
• Ensure that the shield is properly installed on the torch.
• Check the torch for damage and replace it if necessary.
• Check the power cord for damage and replace it if necessary.
• Contact Hypertherm customer service for assistance.

Conclusion

The Hypertherm 120929 PowerMax 1250 Shield, Hand Cutting is a high-quality replacement part that can help to extend the life of your plasma cutter. This shield is easy to install and can help to protect the torch from damage.