Hypertherm 120828 Shield, Hand Cutting

Product Description

The Hypertherm 120828 Shield, Hand Cutting is a replacement part for Hypertherm plasma cutting torches. It is made of durable material that can withstand the high temperatures and pressures of plasma cutting. The shield helps to protect the torch from damage and ensures that the plasma arc is properly directed.

Specifications

• Brand: Hypertherm
• Part Number: 120828
• Part Description: Shield, Hand Cutting
• Material: Stainless Steel
• Dimensions: 2.5" x 1.5" x 0.5"
• Weight: 0.5 lbs.

Compatibility

The Hypertherm 120828 Shield, Hand Cutting is compatible with the following Hypertherm plasma cutting torches:

• Powermax30 XP
• Powermax45 XP
• Powermax65 XP
• Powermax85 XP
• Powermax105 XP
• Powermax125 XP

Installation

The Hypertherm 120828 Shield, Hand Cutting can be installed by following these steps:

1. Turn off the power to the plasma cutting torch.
2. Remove the old shield from the torch.
3. Install the new shield on the torch.
4. Tighten the screws that hold the shield in place.
5. Turn on the power to the plasma cutting torch.

Maintenance

The Hypertherm 120828 Shield, Hand Cutting should be inspected regularly for signs of wear or damage. If the shield is damaged, it should be replaced immediately. To clean the shield, use a mild detergent and water. Do not use harsh chemicals or abrasives, as these can damage the shield.

Troubleshooting

If the Hypertherm 120828 Shield, Hand Cutting is damaged, it can cause the following problems:

• The plasma arc may not be properly directed.
• The torch may overheat.
• The torch may produce excessive smoke.

If you are experiencing any of these problems, inspect the shield for damage and replace it if necessary.

Warranty

The Hypertherm 120828 Shield, Hand Cutting is backed by a one-year warranty. If the shield fails within one year of purchase, it will be replaced free of charge.