Hypertherm 120838 Shield Cap

Part Description

The Hypertherm 120838 Shield Cap is a replacement part for Hypertherm plasma cutters. It is made of durable materials and is designed to protect the torch from damage. The shield cap is easy to install and can be replaced in minutes.

Specifications

• Brand: Hypertherm
• Part number: 120838
• Part description: Shield Cap, Max 200 OHMIC CONT.
• Material: Copper
• Dimensions: 1.5" x 1.5" x 0.5"
• Weight: 0.5 ounces

Compatibility

The Hypertherm 120838 Shield Cap is compatible with the following Hypertherm plasma cutters:

• Powermax30 XP
• Powermax45 XP
• Powermax65 XP
• Powermax85 XP
• Powermax105 XP
• Powermax125 XP

Installation

To install the Hypertherm 120838 Shield Cap, follow these steps:

1. Turn off the plasma cutter and allow it to cool down.
2. Remove the old shield cap by unscrewing it from the torch.
3. Screw the new shield cap onto the torch.
4. Tighten the shield cap until it is snug.

Maintenance

The Hypertherm 120838 Shield Cap should be inspected regularly for signs of wear or damage. If the shield cap is damaged, it should be replaced immediately. To clean the shield cap, use a soft cloth and mild detergent.

Troubleshooting

If you are experiencing problems with your Hypertherm plasma cutter, the shield cap may be the cause. Check the shield cap for signs of wear or damage. If the shield cap is damaged, replace it and see if that solves the problem.

Warranty

The Hypertherm 120838 Shield Cap is backed by a one-year warranty. If the shield cap fails within one year of purchase, it will be replaced free of charge.