Monthly Basis
What's happening this month?

Hypertherm 020423 Retaining Cap Max 200

Product Description

The Hypertherm 020423 is a retaining cap for the Hypertherm Max 200 plasma cutter. This cap is responsible for holding the electrode in place and ensuring that the plasma arc is properly formed. The cap is made of a durable material that can withstand the high temperatures and pressures generated by the plasma cutting process.

Specifications

  • Brand: Hypertherm
  • Part number: 020423
  • Part description: Hypertherm Retaining Cap Max 200

Features

  • Durable construction
  • Withstands high temperatures and pressures
  • Ensures proper formation of plasma arc

Applications

The Hypertherm 020423 Retaining Cap Max 200 is used in the following applications:

  • Plasma cutting
  • Metal fabrication
  • Welding

Installation

The Hypertherm 020423 Retaining Cap Max 200 can be installed by following these steps:

  1. Turn off the plasma cutter and allow it to cool down.
  2. Remove the old retaining cap by unscrewing it from the torch head.
  3. Screw the new retaining cap onto the torch head.
  4. Tighten the retaining cap until it is snug.
  5. Turn on the plasma cutter and test it to make sure that the cap is installed correctly.

Maintenance

The Hypertherm 020423 Retaining Cap Max 200 should be inspected regularly for wear and tear. If the cap is damaged, it should be replaced immediately. The cap can be cleaned by wiping it down with a dry cloth.

Troubleshooting

If you are experiencing problems with the Hypertherm 020423 Retaining Cap Max 200, you can try the following troubleshooting steps:

  • Check the cap for damage. If the cap is damaged, it should be replaced.
  • Clean the cap by wiping it down with a dry cloth.
  • Make sure that the cap is installed correctly.
  • If the problem persists, contact Hypertherm customer service for assistance.

Similar Parts

020424
Hypertherm Shield Cap/200 Amp Max 200 HT 2000

020795
70 amp retaining cap, Hypertherm HD3070

120592
100 amp retaining cap, Hypertherm HD3070

220021
electrode, 200 amps Air or Oxygen for Max 200

120838
Shield Cap, Max 200 OHMIC CONT.

C107-266
Retaining Cap, 200/275 Amp, MS/SS/AL

220347
Cap HPR 200 amp nozzle retaining

220759
HPRXD/Nozzle Retaining Cap/200 Amp/Aluminum

228908
KIT:HyPro2000 TORCH RETROFIT KIT FOR MAX 200

073002
MAX 200 240-480v 3hp, 60 hz