Hypertherm 120791 Swirl Ring HT4400 200A Oxy CW

Brand

Hypertherm

Part Number

120791

Part Description

Swirl Ring HT4400 200A Oxy CW

Features

• Improved cut quality
• Increased productivity
• Reduced operating costs

Benefits

• The Hypertherm 120791 Swirl Ring HT4400 200A Oxy CW is designed to improve cut quality, increase productivity, and reduce operating costs.
• The swirl ring creates a more focused and consistent plasma arc, which results in cleaner cuts with less dross.
• The increased productivity is due to the faster cutting speeds that can be achieved with the swirl ring.
• The reduced operating costs are due to the longer life of the swirl ring, which means that it does not need to be replaced as often.

Applications

The Hypertherm 120791 Swirl Ring HT4400 200A Oxy CW is ideal for a variety of applications, including:

• Cutting mild steel
• Cutting stainless steel
• Cutting aluminum
• Cutting other metals

Specifications

• Diameter: 1.125 inches
• Height: 0.75 inches
• Weight: 0.5 ounces

Installation

The Hypertherm 120791 Swirl Ring HT4400 200A Oxy CW can be easily installed by following these steps:

1. Remove the old swirl ring from the torch.
2. Clean the torch body and the swirl ring seat.
3. Apply a small amount of anti-seize compound to the swirl ring threads.
4. Screw the new swirl ring onto the torch body.
5. Tighten the swirl ring until it is snug.

Maintenance

The Hypertherm 120791 Swirl Ring HT4400 200A Oxy CW should be inspected regularly for wear and tear. If the swirl ring is damaged, it should be replaced immediately.

Troubleshooting

If you are experiencing problems with the Hypertherm 120791 Swirl Ring HT4400 200A Oxy CW, here are a few troubleshooting tips:

• Check the swirl ring for damage.
• Clean the swirl ring and the torch body.
• Make sure that the swirl ring is properly installed.
• If the problem persists, contact Hypertherm technical support.