Hypertherm Swirl Ring 200A SST (Part Number: 120726)

Product Details

The Hypertherm Swirl Ring 200A SST is a genuine Hypertherm replacement part for Powermax45 XP, Powermax65, Powermax85, Powermax105, Powermax125 plasma cutters.

This swirl ring is made of stainless steel and has a 200 amp rating.

Specifications

• Brand: Hypertherm
• Part Number: 120726
• Description: Swirl Ring 200A SST
• Material: Stainless Steel
• Amperage Rating: 200A
• Compatibility: Powermax45 XP, Powermax65, Powermax85, Powermax105, Powermax125

Features

• Genuine Hypertherm replacement part
• Made of high-quality stainless steel
• Durable construction for long life
• Easy to install

Applications

The Hypertherm Swirl Ring 200A SST is used in Powermax45 XP, Powermax65, Powermax85, Powermax105, Powermax125 plasma cutters.

Installation

To install the Hypertherm Swirl Ring 200A SST, follow these steps:

1. Turn off the power to the plasma cutter.
2. Remove the old swirl ring by unscrewing it from the torch body.
3. Clean the torch body and the new swirl ring with a clean cloth.
4. Apply a small amount of anti-seize compound to the threads of the new swirl ring.
5. Screw the new swirl ring onto the torch body until it is snug.
6. Turn on the power to the plasma cutter and test the new swirl ring.

Troubleshooting

If the plasma cutter is not cutting properly after installing the new swirl ring, check the following:

• Make sure that the swirl ring is installed correctly.
• Check the swirl ring for any damage.
• Clean the swirl ring and the torch body.
• If the problem persists, contact Hypertherm customer service for assistance.

Conclusion

The Hypertherm Swirl Ring 200A SST is a genuine Hypertherm replacement part that is made of high-quality stainless steel. It is easy to install and can be used in a variety of applications. If you are experiencing problems with your plasma cutter, replacing the swirl ring may be the solution.