The Hypertherm 081062 is a CTHC Firmware Chip IOP (Input/Output Processor).
Features
Controls the operation of the Hypertherm CTHC torch height control system
Provides real-time torch height control
Improves cut quality and productivity
Easy to install and use
Applications
The Hypertherm 081062 CTHC Firmware Chip IOP is used in a variety of applications, including:
Plasma cutting
Laser cutting
Waterjet cutting
Specifications
Power requirements: 24 VDC
Current draw: 100 mA
Operating temperature: 0 to 50°C (32 to 122°F)
Storage temperature: -20 to 70°C (-4 to 158°F)
Dimensions: 3.5" x 2.5" x 1.0" (89 x 64 x 25 mm)
Weight: 0.5 lbs (0.2 kg)
Installation
The Hypertherm 081062 CTHC Firmware Chip IOP is easy to install. Simply follow these steps:
Power down the CNC machine.
Locate the CTHC control box.
Open the control box and locate the IOP slot
Insert the IOP into the slot.
Secure the IOP with the screws provided.
Power on the CNC machine.
Operation
The Hypertherm 081062 CTHC Firmware Chip IOP is a plug-and-play device. No software or configuration is required.
Troubleshooting
If you are experiencing problems with the Hypertherm 081062 CTHC Firmware Chip IOP, please refer to the following troubleshooting tips:
Check the power connections to the IOP.
Check the data connections to the IOP.
Verify that the IOP is properly seated in the slot.
Update the firmware on the IOP.
Conclusion
The Hypertherm 081062 CTHC Firmware Chip IOP is a reliable and easy-to-use torch height control solution. It provides real-time torch height control, improving the quality of cuts and increasing productivity.