Hypertherm Relay Board

Part Number: 041594

Description

Relay board for use with Hypertherm gas consoles. This board controls the flow of gas to the torch.

Specifications

Input voltage: 24 VDC
Output current: 10 A
Number of outputs: 4
Relay type: SPDT
Dimensions: 3.5" x 2.5" x 1.0"
Weight: 0.5 lbs

Installation

Disconnect the power from the gas console.
Remove the old relay board.
Install the new relay board.
Reconnect the power to the gas console.
Test the relay board by turning on the gas console and verifying that the gas flows to the torch.

Troubleshooting

If the relay board is not working properly, check the following:

The input voltage is correct.
The output current is not превышен.
The relay type is correct.
The relay board is properly installed.
There is no damage to the relay board.

If you are still having problems, contact Hypertherm technical support for assistance.

Conclusion

The Hypertherm relay board for gas consoles is a reliable and easy-to-install component that is essential for the proper operation of your gas console.

Similar Parts

229882
RELAY SUBASSEMBLY:XPR HIGH VOLTAGE RELAY

428002
KIT:PRINTED CIRCUIT BOARD ASSEMBLY RELAY I/O EDGE PRO TI

024028
Plasma preflow gas hosing, from gas console to motor valve console blue hose, 25 ft.

024321
Plasma cut flow gas hosing, gas console to motor valve console blue hose, 25 ft.

028684
Shield gas Hose Set - Gas Console / RHF Console, HT2000, 15 ft.

041912
Manual Gas Console Control Board USE PART # 141036

141036
PRINTED CIRCUIT BOARD ASSEMBLY:HPR MANUAL GAS CONSOLE II

041657
Control Board for Gas Console

041246
HT2000 LHF Relay PCB

ELCO-0056
24V DIN Mount Relay SPST