Monthly Basis
What's happening this month?

Hypertherm 020041 2" Torch Sleeve

Product Description

The Hypertherm 020041 is a 2" torch sleeve for the Max 200, HT2000, and Pac 500 plasma systems. The torch sleeve is responsible for protecting the torch from damage and ensuring proper alignment of the plasma arc. It is made of a durable material that can withstand high temperatures and is easy to install.

Specifications

  • Brand: Hypertherm
  • Part number: 020041
  • Part description: 2" torch sleeve for the Max 200 / HT2000 / Pac 500 Plasma systems
  • Material: Stainless steel
  • Length: 2"
  • Diameter: 1"

Features

  • Protects the torch from damage
  • Ensures proper alignment of the plasma arc
  • Durable material can withstand high temperatures
  • Easy to install

Compatibility

The Hypertherm 020041 2" torch sleeve is compatible with the following plasma systems:

  • Hypertherm Max 200
  • Hypertherm HT2000
  • Hypertherm Pac 500

Installation

The Hypertherm 020041 2" torch sleeve can be installed by following these steps:

  1. Remove the old torch sleeve.
  2. Clean the torch body.
  3. Apply a thin layer of thermal grease to the new torch sleeve.
  4. Insert the new torch sleeve into the torch body.
  5. Tighten the torch sleeve retaining screws.

Maintenance

The Hypertherm 020041 2" torch sleeve should be inspected regularly for signs of wear or damage. If the torch sleeve is damaged, it should be replaced immediately. The torch sleeve should also be cleaned periodically with a mild detergent and water solution.

Troubleshooting

If you are experiencing problems with your Hypertherm plasma system, the torch sleeve may be the cause. Here are some troubleshooting tips:

  • Check the torch sleeve for signs of wear or damage.
  • Clean the torch sleeve with a mild detergent and water solution.
  • Reinstall the torch sleeve.
  • If the problem persists, contact Hypertherm customer service.

Conclusion

The Hypertherm 020041 2" torch sleeve is an important part of your plasma cutting system. By following these tips, you can ensure that your torch sleeve is properly installed and maintained, which will help to extend the life of your plasma system.

Similar Parts

020407
Adapter for 2" torch sleeve to 1 3/4" torch for Max 200 / HT2000

020030
Pac 500 torch body

028031
Pac-500 Torch Head Complete

128364
Max 200 Machine Torch Assembly, Body with Sleeve

028872
Coolant for plasma systems

020037
Nozzle for PAC 500 .220

040237
SCR Phase Control for PAC 500/H601 Power Supply 800A 1400V

037169
Disc Capacitor for PAC 500/H601 Power Supply H401 .01UF 1000 VDC CER

020048
Swirl Ring for PAC 500

020040
Swirl Ring: PAC 500 .220