Hypertherm 005122 Off Red Button for Power Supply

Part Information

Brand: Hypertherm Part Number: 005122 Description: Off Red Button for Power Supply

Product Features

• Easy to install and replace
• Durable construction for long life
• Meets or exceeds OEM specifications

Compatibility

• Hypertherm Power Supply Models:
  • Powermax45XP
  • Powermax65XP
  • Powermax85XP
  • Powermax105XP
  • Powermax125XP

Installation Instructions

1. Disconnect power from the power supply.
2. Remove the old button by unscrewing the two screws that hold it in place.
3. Install the new button by screwing it into place with the two screws that you removed in the previous step.
4. Reconnect power to the power supply.

Troubleshooting

If the new button does not work, check the following:

• Make sure that the button is properly installed.
• Make sure that the power supply is receiving power.
• Check the wiring connections between the button and the power supply.

If you have any further questions or concerns, please contact Hypertherm customer support.

Safety Information

• Always wear safety glasses when working on or around power supplies.
• Disconnect power from the power supply before performing any maintenance or repairs.
• Do not touch any live wires or components.

Similar Parts

005121
PUSH BUTTON SWITCH: GREEN 2 NO ILLUMINATE

005094
PUSH BUTTON SWITCH: TORCH

228055
HSD Cable and hose assembly from power supply to off-valve, 75 ft

005091
Lens Red

228468
KIT:PUSHBUTTON SWITCH ASSEMBLY EDGE PRO RED

124045
Hose assembly:XPR 3/8" red left hand B 60M/ 196.9'

124044
HOSE ASSEMBLY:XPR 3/8" RED LEFT HAND 'B' 45M/147.6'

024656
HOSE ASSY:3/8 RED LH 'B' 15M/50'

005688
PUSHBUTTON SWITCH:RED EXTENDED BLACK BEZEL MOMENTARY NORMALLY OPEN

026503
O-RING:SILCN 70 DURO .275 X .040 RUST RED