Hypertherm 002513 Reservoir: HPR Coolant

Product Description

The Hypertherm 002513 Reservoir: HPR Coolant is a genuine Hypertherm replacement part. This reservoir is designed for use with Hypertherm HPR plasma cutting systems.

Specifications

• Brand: Hypertherm
• Part number: 002513
• Description: RESERVOIR: HPR COOLANT
• Weight: 1.00 lbs
• Dimensions: 6" x 6" x 6"

Compatibility

The Hypertherm 002513 Reservoir: HPR Coolant is compatible with the following Hypertherm plasma cutting systems:

• HPR130XD
• HPR260XD
• HPR400XD

Installation

To install the Hypertherm 002513 Reservoir: HPR Coolant, follow these steps:

1. Turn off the power to the plasma cutting system.
2. Disconnect the coolant lines from the reservoir.
3. Remove the old reservoir.
4. Install the new reservoir.
5. Reconnect the coolant lines to the reservoir.
6. Turn on the power to the plasma cutting system.

Maintenance

To maintain the Hypertherm 002513 Reservoir: HPR Coolant, follow these steps:

• Check the coolant level regularly and add coolant as needed.
• Clean the reservoir and coolant lines periodically.
• Replace the reservoir if it is damaged.

Similar Parts

002561
RESERVOIR:XPR300 COOLANT

002537
RESERVOIR: HPR400XD COOLANT

229408
Original Part 109393 THERMISTOR SUBASSEMBLY:HPR/HSD COOLANT 3/8 NATIONAL PIPE THREAD WI...

428309
KIT:TORCH REBUILD & FILTER PREVENTATIVE MAINTENANCE KIT W/O COOLANT:HPR

428310
KIT:TORCH REBUILD & FILTER PREVENTATIVE MAINTENANCE KIT W/COOLANT:HPR

027664
Coolant filter for HD4070/HT4400/HPR/HPRXD

28872-CS
Plasma Coolant

229721
SOLENOID VALVE SUBASSEMBLY:COOLANT 24 VOLTS DIRECT CURRENT

229126
HSD 130 Coolant Pump

228739
KIT:HOSE:HPR260 COOLANT