Hypertherm 428631 KIT:EDGE CONNECT PWR SCE

Product Description

The Hypertherm 428631 KIT:EDGE CONNECT PWR SCE is a genuine Hypertherm replacement part. This kit includes the following items:

• Edge Connect Power Supply
• Mounting Hardware
• Installation Instructions

The 428631 KIT:EDGE CONNECT PWR SCE is compatible with the following Hypertherm plasma cutters:

• Powermax30 XP
• Powermax45 XP
• Powermax65 XP
• Powermax85 XP
• Powermax105 XP
• Powermax125 XP

Installation

To install the 428631 KIT:EDGE CONNECT PWR SCE, follow these steps:

1. Disconnect the power supply from the plasma cutter.
2. Remove the old edge connect power supply.
3. Install the new edge connect power supply.
4. Reconnect the power supply to the plasma cutter.
5. Verify that the new edge connect power supply is working properly.

Troubleshooting

If you are experiencing problems with the 428631 KIT:EDGE CONNECT PWR SCE, please refer to the following troubleshooting tips:

• Check the connections between the edge connect power supply and the plasma cutter.
• Make sure that the edge connect power supply is properly seated in the slot.
• Check the power supply for any damage.
• If the problem persists, contact Hypertherm technical support for assistance.

Warranty

The 428631 KIT:EDGE CONNECT PWR SCE is backed by Hypertherm's standard warranty. For more information, please visit the Hypertherm website.