Hypertherm 420233 SWIRL RING:XPR 50A MS

Product Description

The Hypertherm 420233 SWIRL RING:XPR 50A MS is a genuine Hypertherm replacement part for XPR50A plasma cutting systems. This swirl ring is designed to create a swirling motion of the plasma gas, which helps to improve cut quality and reduce dross. The swirl ring is made of a durable material that can withstand the high temperatures and pressures generated by the plasma cutting process.

Specifications

• Part Number: 420233
• Brand: Hypertherm
• Description: SWIRL RING:XPR 50A MS

Compatibility

The Hypertherm 420233 SWIRL RING:XPR 50A MS is compatible with the following Hypertherm plasma cutting systems:

• XPR50A

Installation

The Hypertherm 420233 SWIRL RING:XPR 50A MS can be installed by following these steps:

1. Turn off the power to the plasma cutting system.
2. Remove the old swirl ring from the torch.
3. Install the new swirl ring onto the torch.
4. Tighten the swirl ring to the specified torque.
5. Turn on the power to the plasma cutting system.

Maintenance

The Hypertherm 420233 SWIRL RING:XPR 50A MS should be inspected regularly for signs of wear or damage. If the swirl ring is damaged, it should be replaced immediately.

Troubleshooting

If you are experiencing problems with your Hypertherm plasma cutting system, the swirl ring may be the cause. Here are some troubleshooting tips:

• Check the swirl ring for signs of wear or damage.
• Make sure the swirl ring is properly installed.
• Clean the swirl ring with a soft brush or cloth.
• If the problem persists, contact Hypertherm technical support.

Warranty

The Hypertherm 420233 SWIRL RING:XPR 50A MS is covered by a one-year warranty. For more information, please see the Hypertherm warranty policy.