Hypertherm 223582 Cable
Part Description
223582 Cable:2/0 60M/196.9' w strain relief
Specifications
- Length: 60M/196.9'
- Gauge: 2/0
- Strain Relief: Yes
Compatibility
This cable is compatible with the following Hypertherm plasma cutters:
- Powermax45XP
- Powermax65
- Powermax85
- Powermax105
- Powermax125
Installation
- Disconnect the power supply from the plasma cutter.
- Remove the old cable from the plasma cutter.
- Connect the new cable to the plasma cutter.
- Reconnect the power supply to the plasma cutter.
Troubleshooting
If you are experiencing problems with the cable, please check the following:
- Make sure that the cable is properly connected to the plasma cutter and the power supply.
- Check the cable for any damage.
- If the cable is damaged, replace it with a new one.
Similar Parts
223538
Lead:XPR pilot arc ignition 60M/196.9' w strain relief
223637
Cable:2/0 60M/196.9'
124045
Hose assembly:XPR 3/8" red left hand B 60M/ 196.9'
428484
Hose set XPR power supply to console cooling 60M/196.9'
124056
Hose assembly:XPR 3/8" blue #6 water 60M/ 196.9'
124034
Hose assembly:XPR 3/8" black #6 air 60M/ 196.9'
124012
Hose assembly:HPR 3/8" blue right hand B 60M/196.9'
124023
Hose assembly:XPR 3/8" black right hand B inert 60M/196.9'
223525
CABLE:4/0 35M/114.8' WITH STRAIN RELIEF
223749
Cable 1/0 15 meter/49.2 feet with strain relief