Hypertherm 223213 CABLE:CNC I/O THC CONT INTERFACE 10'

Product Description

The Hypertherm 223213 is a 10-foot cable that connects a CNC I/O THC control interface to a Hypertherm plasma cutting system. This cable is required for use with the following Hypertherm plasma cutting systems:

• Powermax45 XP
• Powermax65 SYNC
• Powermax85 SYNC
• Powermax105 SYNC
• Powermax125 SYNC

Specifications

• Cable Length: 10 feet
• Connector Type: DB-25 male to DB-25 female
• Shielding: Braided copper
• Jacket Material: PVC

Installation

To install the 223213 cable, follow these steps:

1. Connect the DB-25 male connector on the cable to the DB-25 female connector on the CNC I/O THC control interface.
2. Connect the DB-25 female connector on the cable to the DB-25 male connector on the Hypertherm plasma cutting system.
3. Secure the cable using the provided cable ties.

Troubleshooting

If you are experiencing problems with the 223213 cable, check the following:

• Make sure that the cable is properly connected to the CNC I/O THC control interface and the Hypertherm plasma cutting system.
• Check the cable for any damage.
• If the cable is damaged, replace it with a new one.

Ordering Information

The Hypertherm 223213 cable can be ordered from your local Hypertherm dealer.

Similar Parts

223221
CABLE:LIFTER THC CONT INTERFACE 35'

223220
CABLE:LIFTER THC CONT INTERFACE 20'

123443
CNC interface cable, power supply to CNC, 75 ft.

123442
CNC interface cable - PS to CNC, 50 ft.

223122
CABLE:CNC I/O THC CONTROL INTERFACE 25'

223103
Cable: Plasma I/O THC Cont Intfc 75'

129066
HARN:C-THC CONT MDL

128407
KIT: C-THC Cont. PCB Repl.

081259
CNC SOFTWARE: CNC: TRUESHAPE NESTING

023335
Machine Interface Cable from PS to CNC, 50 ft.