Hypertherm 220947 SWIRL RING: PMX FINE CUT

Brand

Hypertherm

Part number

220947

Part description

SWIRL RING: PMX FINE CUT

Product Features

• Improved cut quality
• Increased productivity
• Reduced operating costs
• Extended consumable life

Applications

• Fine cutting of mild steel, stainless steel, and aluminum
• Suitable for use with Hypertherm PMX plasma cutting systems

Specifications

• Material: Copper
• Dimensions: 1.5" OD x 1.125" ID x 0.375" thick
• Weight: 0.5 oz

Installation

1. Remove the old swirl ring from the torch.
2. Clean the torch body and the swirl ring seat.
3. Apply a small amount of anti-seize compound to the new swirl ring.
4. Install the new swirl ring on the torch body.
5. Tighten the swirl ring to the specified torque.

Maintenance

• Inspect the swirl ring for wear and damage before each use.
• Replace the swirl ring if it is damaged or worn.

Troubleshooting

• If the cut quality is poor, the swirl ring may be damaged or worn. Replace the swirl ring and try again.
• If the swirl ring is not installed correctly, the torch may not fire or the cut quality may be poor. Remove the swirl ring and reinstall it correctly.

Safety Precautions

• Wear safety glasses when working with plasma cutting equipment.
• Do not touch the swirl ring while the torch is in operation.
• Allow the torch to cool down before performing maintenance.

Warranty

Hypertherm warrants this product to be free from defects in material and workmanship for a period of one year from the date of purchase.