Hypertherm 220935 SHIELD CAP:HyPro2000 O2/AIR CLOCK WISE

Product Description

The Hypertherm 220935 SHIELD CAP:HyPro2000 O2/AIR CLOCK WISE is a genuine Hypertherm replacement part.

Specifications

• Brand: Hypertherm
• Part number: 220935
• Description: SHIELD CAP:HyPro2000 O2/AIR CLOCK WISE

Compatibility

The Hypertherm 220935 SHIELD CAP:HyPro2000 O2/AIR CLOCK WISE is compatible with the following Hypertherm plasma cutting systems:

• HyPro2000 O2/AIR

Installation

To install the Hypertherm 220935 SHIELD CAP:HyPro2000 O2/AIR CLOCK WISE, follow these steps:

1. Turn off the power to the plasma cutting system.
2. Remove the old shield cap by unscrewing it counterclockwise.
3. Screw the new shield cap onto the plasma torch clockwise until it is snug.
4. Turn on the power to the plasma cutting system.

Troubleshooting

If you are experiencing problems with the Hypertherm 220935 SHIELD CAP:HyPro2000 O2/AIR CLOCK WISE, here are some troubleshooting tips:

• Check the shield cap to make sure that it is properly installed.
• Make sure that the shield cap is not damaged.
• If you are still experiencing problems, contact Hypertherm customer support for assistance.

Conclusion

The Hypertherm 220935 SHIELD CAP:HyPro2000 O2/AIR CLOCK WISE is a genuine Hypertherm replacement part that is essential for the proper operation of your Hypertherm plasma cutting system. By following the installation and troubleshooting tips in this document, you can ensure that your Hypertherm plasma cutting system is operating at peak performance.