Hypertherm 128984 Hose Set: Ignition Cooling, 20 m/65 ft.

Product Description

The Hypertherm 128984 Hose Set is a replacement part for Hypertherm plasma cutting systems. This hose set is used to connect the plasma torch to the power supply. It is made of a durable, flexible material that can withstand the high temperatures and pressures generated by the plasma cutting process. The hose set is 20 meters (65 feet) long, which provides ample reach for most cutting applications.

Features

• Durable, flexible material
• Withstands high temperatures and pressures
• 20 meters (65 feet) long

Compatibility

The Hypertherm 128984 Hose Set is compatible with the following Hypertherm plasma cutting systems:

• Powermax45XP
• Powermax65
• Powermax85
• Powermax105
• Powermax125

Installation

The Hypertherm 128984 Hose Set can be installed by following these steps:

1. Turn off the plasma cutting system and disconnect the power cord.
2. Locate the old hose set and disconnect it from the plasma torch and the power supply.
3. Connect the new hose set to the plasma torch and the power supply.
4. Tighten the connections until they are snug.
5. Turn on the plasma cutting system and test the hose set by operating the torch.

Troubleshooting

If you are experiencing problems with the Hypertherm 128984 Hose Set, please refer to the following troubleshooting tips:

• Check the connections to make sure they are tight.
• Inspect the hose set for any damage.
• Replace the hose set if it is damaged.

Conclusion

The Hypertherm 128984 Hose Set is a high-quality replacement part for Hypertherm plasma cutting systems. This hose set is durable, flexible, and easy to install. It is compatible with a variety of Hypertherm plasma cutting systems.