Hypertherm 123673 Cable: Ignition, 45 m/150 ft

Product Description

The Hypertherm 123673 Cable: Ignition, 45 m/150 ft is a genuine Hypertherm replacement part. This cable is used to connect the Hypertherm Powermax45XP plasma cutter to the torch. It is a 45-meter (150-foot) long cable that is made of a durable, flexible material. The cable is also resistant to heat and chemicals.

Features

• Genuine Hypertherm replacement part
• 45-meter (150-foot) long cable
• Durable, flexible material
• Resistant to heat and chemicals

Compatibility

The Hypertherm 123673 Cable: Ignition, 45 m/150 ft is compatible with the following Hypertherm plasma cutters:

• Powermax45XP

Installation

The Hypertherm 123673 Cable: Ignition, 45 m/150 ft can be installed by following these steps:

1. Disconnect the power supply from the plasma cutter.
2. Remove the old cable from the plasma cutter and the torch.
3. Connect the new cable to the plasma cutter and the torch.
4. Reconnect the power supply to the plasma cutter.

Troubleshooting

If you are experiencing problems with the Hypertherm 123673 Cable: Ignition, 45 m/150 ft, you can try the following troubleshooting steps:

• Check the connections between the cable and the plasma cutter and the torch.
• Make sure that the cable is not damaged.
• If the cable is damaged, replace it with a new one.
• If you are still experiencing problems, contact Hypertherm customer support for assistance.

Conclusion

The Hypertherm 123673 Cable: Ignition, 45 m/150 ft is a genuine Hypertherm replacement part that is essential for the proper operation of the Hypertherm Powermax45XP plasma cutter. This cable is durable, flexible, and resistant to heat and chemicals. It is easy to install and can be replaced if it becomes damaged.