Hypertherm 123513 Power Cable

Part Description

The Hypertherm 123513 power cable is a 6-foot (1.8-meter) cable that connects the gas console to the ignition console. It is a shielded cable with a PVC jacket. The cable has a male connector on one end and a female connector on the other end.

Specifications

• Length: 6 feet (1.8 meters)
• Jacket Material: PVC
• Connectors: Male and female
• Shielded: Yes

Applications

The Hypertherm 123513 power cable is used to connect the gas console to the ignition console on Hypertherm plasma cutting systems.

Installation

To install the Hypertherm 123513 power cable, follow these steps:

1. Turn off the power to the plasma cutting system.
2. Disconnect the gas console from the ignition console.
3. Connect the male connector of the power cable to the female connector on the gas console.
4. Connect the female connector of the power cable to the male connector on the ignition console.
5. Turn on the power to the plasma cutting system.

Troubleshooting

If the Hypertherm 123513 power cable is not working properly, check the following:

• Make sure that the cable is properly connected to the gas console and the ignition console.
• Check the cable for damage.
• If the cable is damaged, replace it with a new one.

Conclusion

The Hypertherm 123513 power cable is an important part of the Hypertherm plasma cutting system. It is responsible for providing power to the ignition console. If the power cable is not working properly, it can prevent the plasma cutting system from operating.