Hypertherm 120651 Torch Body for HT4400 / HD4070

Product Description

The Hypertherm 120651 Torch Body is a replacement part for the HT4400 and HD4070 plasma cutters. This torch body is made of durable materials and is designed to withstand the high temperatures and pressures generated by plasma cutting. The 120651 Torch Body includes the following components:

• Torch head
• Nozzle
• Retaining cap
• O-ring
• Spring

Specifications

• Brand: Hypertherm
• Part number: 120651
• Part description: Torch Body
• For use with: HT4400 and HD4070 plasma cutters
• Material: Stainless steel
• Dimensions: 6.5" x 2.5" x 2.5"
• Weight: 1 lb.

Installation

To install the 120651 Torch Body, follow these steps:

1. Disconnect the power supply from the plasma cutter.
2. Remove the old torch body by unscrewing the retaining cap and pulling the torch head out of the plasma cutter.
3. Clean the plasma cutter and the new torch body with a solvent.
4. Apply a small amount of grease to the O-ring on the new torch body.
5. Insert the new torch body into the plasma cutter and secure it with the retaining cap.
6. Reconnect the power supply to the plasma cutter.

Troubleshooting

If you are experiencing problems with your Hypertherm plasma cutter, the following troubleshooting steps may help:

• Check the torch body for damage. If the torch body is damaged, it will need to be replaced.
• Check the O-ring on the torch body for damage. If the O-ring is damaged, it will need to be replaced.
• Clean the plasma cutter and the torch body with a solvent.
• Reinstall the torch body.
• If you are still experiencing problems, contact Hypertherm customer support for assistance.

Conclusion

The Hypertherm 120651 Torch Body is a high-quality replacement part for the HT4400 and HD4070 plasma cutters. This torch body is made of durable materials and is designed to withstand the high temperatures and pressures generated by plasma cutting. If you are experiencing problems with your Hypertherm plasma cutter, the 120651 Torch Body may be the solution.