Hypertherm 081264 CNC Software: Plasma: Sensor THC 2: Advanced

Product Description

The Hypertherm 081264 CNC Software: Plasma: Sensor THC 2: Advanced is a software package that provides advanced torch height control (THC) capabilities for plasma cutting machines. This software is designed to work with Hypertherm's Sensor THC 2 height control system, which uses a non-contact sensor to maintain a consistent distance between the plasma torch and the workpiece.

The 081264 software package includes a number of features that improve the performance of the Sensor THC 2 system, including:

• Automatic torch height sensing and adjustment
• Real-time THC feedback
• THC offset adjustment
• THC sensitivity adjustment
• THC speed adjustment

The 081264 software package also includes a number of other features that improve the overall performance of the plasma cutting machine, including:

• Improved arc starting and stopping
• Reduced dross formation
• Improved cut quality
• Increased productivity

System Requirements

The 081264 software package requires the following system components:

• A Windows-based computer with a minimum of 1 GB of RAM and 10 GB of hard drive space
• A Hypertherm Powermax or HPR plasma cutting system
• A Hypertherm Sensor THC 2 height control system
• A compatible CNC control system

Installation

The 081264 software package can be installed by following the instructions in the installation manual. The installation process typically takes less than 30 minutes.

Operation

The 081264 software package can be operated using the following steps:

1. Start the CNC control system.
2. Load the cutting program.
3. Set the THC parameters.
4. Start the cutting process.

The 081264 software package will automatically adjust the torch height during the cutting process to maintain a consistent distance between the torch and the workpiece.

Troubleshooting

If you experience any problems with the 081264 software package, you can refer to the troubleshooting section of the user manual. The troubleshooting section provides information on how to resolve common problems.

Support

If you need further assistance with the 081264 software package, you can contact Hypertherm technical support. Hypertherm technical support is available 24 hours a day, 7 days a week.

Similar Parts

081263
CNC SOFTWARE: PLASMA: SENSOR THC 1: ADVANCED

081278
CNC SOFTWARE:PLASMA / OXY:ADVANCED

081262
CNC SOFTWARE: PLASMA: SENSOR THC 1:INTERMEDIATE

081259
CNC SOFTWARE: CNC: TRUESHAPE NESTING

081271
CNC SOFTWARE:PLASMA:DUAL TRANSVERSE

081277
CNC Software: Plasma/Oxy: Intermediate

081267
CNC SOFTWARE:PLASMA:BEVEL 1

123442
CNC interface cable - PS to CNC, 50 ft.

123443
CNC interface cable, power supply to CNC, 75 ft.

228245
Sensor PHC, w/out Plasma Interface