Hypertherm 073069 - HT2000 MOT-VALVE CSL

Product Description

The Hypertherm 073069 HT2000 MOT-VALVE CSL is a genuine Hypertherm replacement part. This valve is used in the following Hypertherm plasma cutting systems:

• Powermax45 XP
• Powermax65
• Powermax85
• Powermax105
• Powermax125

The valve controls the flow of gas to the plasma torch. It is important to use a genuine Hypertherm replacement part to ensure proper operation of your plasma cutting system.

Specifications

• Part Number: 073069
• Description: HT2000 MOT-VALVE CSL
• Brand: Hypertherm
• Weight: 0.25 lbs
• Dimensions: 3 x 2 x 1 inches

Installation

To install the valve,

1. Turn off the power to the plasma cutting system.
2. Disconnect the gas line from the valve.
3. Remove the old valve from the plasma cutting system.
4. Install the new valve in the reverse order of removal.
5. Reconnect the gas line to the valve.
6. Turn on the power to the plasma cutting system.

Troubleshooting

If the valve is not working properly, check the following:

• The gas line is properly connected to the valve.
• The valve is turned on.
• The valve is not damaged.
• Check the Hypertherm troubleshooting guide for more information.

Conclusion

The Hypertherm 073069 HT2000 MOT-VALVE CSL is an important part of your plasma cutting system. By using a genuine Hypertherm replacement part, you can ensure that your system operates properly and safely.