Hypertherm 041897 Power Distribution Board for Metering Console

Description

The Hypertherm 041897 Power Distribution Board (PDB) for Metering Console is a printed circuit board (PCB) that distributes power to the various components of the metering console. The PDB also provides a connection point for the external power supply and the metering console's internal battery.

The PDB is located on the back of the metering console. It is a rectangular board with two rows of screw terminals. The top row of terminals is for the external power supply, and the bottom row of terminals is for the internal battery.

The PDB is connected to the metering console's main board via a ribbon cable. The ribbon cable is located on the right side of the PDB.

Specifications

The Hypertherm 041897 Power Distribution Board for Metering Console has the following specifications:

• Input voltage: 12-24 VDC
• Output voltage: 5 VDC, 12 VDC, and 24 VDC
• Maximum current: 10 A
• Dimensions: 3.5" x 2.5" x 0.5"
• Weight: 0.5 oz

Installation

To install the Hypertherm 041897 Power Distribution Board for Metering Console, follow these steps:

1. Disconnect the external power supply from the metering console.
2. Remove the two screws that secure the PDB to the metering console.
3. Carefully remove the PDB from the metering console.
4. Connect the external power supply to the PDB.
5. Connect the internal battery to the PDB.
6. Insert the ribbon cable into the connector on the PDB.
7. Secure the PDB to the metering console with the two screws that you removed in step 2.

Troubleshooting

If the metering console is not functioning properly, the PDB may be the cause. To troubleshoot the PDB, follow these steps:

1. Check the input voltage to the PDB. The input voltage should be between 12 and 24 VDC.
2. Check the output voltage of the PDB. The output voltage should be 5 VDC, 12 VDC, and 24 VDC.
3. Check the connections between the PDB and the external power supply and the internal battery. Make sure that the connections are secure and that the wires are not damaged.
4. If the PDB is still not functioning properly, replace it with a new one.

Conclusion

The Hypertherm 041897 Power Distribution Board for Metering Console is a critical component of the metering console. By following the installation and troubleshooting steps in this document, you can ensure that the PDB is functioning properly and that the metering console is operating correctly.