Monthly Basis
What's happening this month?

Hypertherm 041534 PCB ASSY PWR DISTR

Product Description

The Hypertherm 041534 PCB ASSY PWR DISTR is a printed circuit board assembly that is used to distribute power to various components within a Hypertherm plasma cutting system. The assembly consists of a number of printed circuit boards that are interconnected by a series of wires. The boards are mounted to a metal chassis that provides support and protection.

The 041534 PCB ASSY PWR DISTR is a critical component of a Hypertherm plasma cutting system. It is responsible for ensuring that the system receives the power it needs to operate properly. The assembly is also responsible for protecting the system from damage in the event of a power surge.

Specifications

The Hypertherm 041534 PCB ASSY PWR DISTR has the following specifications:

  • Input voltage: 110-240 VAC
  • Output voltage: 24 VDC
  • Output current: 10 A
  • Dimensions: 8.5" x 5.5" x 2.5"
  • Weight: 2 lbs.

Features

The Hypertherm 041534 PCB ASSY PWR DISTR has the following features:

  • Overvoltage protection
  • Short circuit protection
  • Thermal protection
  • Reverse polarity protection
  • EMI/RFI suppression
  • CE certified

Applications

The Hypertherm 041534 PCB ASSY PWR DISTR is used in the following applications:

  • Hypertherm plasma cutting systems
  • Other industrial applications

Installation

The Hypertherm 041534 PCB ASSY PWR DISTR should be installed by a qualified technician. The following steps should be followed:

  1. Disconnect the power supply from the system.
  2. Remove the cover from the system.
  3. Locate the 041534 PCB ASSY PWR DISTR.
  4. Remove the old assembly.
  5. Install the new assembly.
  6. Replace the cover.
  7. Reconnect the power supply to the system.

Troubleshooting

If the Hypertherm 041534 PCB ASSY PWR DISTR is not working properly, the following troubleshooting steps should be followed:

  1. Check the input voltage to the assembly.
  2. Check the output voltage of the assembly.
  3. Check the output current of the assembly.
  4. Check for any loose or damaged connections.
  5. If the problem persists, contact Hypertherm technical support.

Conclusion

The Hypertherm 041534 PCB ASSY PWR DISTR is a critical component of a Hypertherm plasma cutting system. It is responsible for ensuring that the system receives the power it needs to operate properly. The assembly is also responsible for protecting the system from damage in the event of a power surge.

Similar Parts

041805
PCB ASSY:HPR MNL GAS CSL PWR DISTR

041147
PCB ASSY:200/4X00/HD PWR DI

028499
LEADS:PAC180 TCH PWR 20'LEADS:PAC180 TCH PWR 20'

029514
HT-2000 I/O PCB PCB-8

041837
PCB ASSY:HPR130/260 I/O

229827
ASSY:INT OPR PNL EDGE CONNECT PCB

041920
PCB Assy HPR HD4070 PC104

041921
PCB Assy: HPR HD4070 Ide Flash Card

PCBS-0125
PCB, Assy, Display Inverter-TFT 12 Volt for DISP-0018

PCBS-0143
Assy, Touchstone Video Controller PCB PCI use with DISP-0018