Hypertherm 041149 Interlock Display PCB

Product Description

The Hypertherm 041149 Interlock Display PCB is a printed circuit board that is used to control the interlock system on Hypertherm plasma cutting machines. The interlock system is a safety feature that prevents the machine from operating if the torch is not properly installed or if the safety door is open. The 041149 Interlock Display PCB is responsible for monitoring the status of the interlock switches and displaying the interlock status on the machine's control panel.

Features

• Controls the interlock system on Hypertherm plasma cutting machines
• Prevents the machine from operating if the torch is not properly installed or if the safety door is open
• Monitors the status of the interlock switches
• Displays the interlock status on the machine's control panel

Specifications

• Brand: Hypertherm
• Part number: 041149
• Part description: Interlock Display PCB
• Dimensions: 3.5" x 2.5" x 0.5"
• Weight: 0.5 lbs.

Applications

The Hypertherm 041149 Interlock Display PCB is used on the following Hypertherm plasma cutting machines:

• Powermax30 XP
• Powermax45 XP
• Powermax65 XP
• Powermax85 XP
• Powermax105 XP
• Powermax125 XP

Installation

The Hypertherm 041149 Interlock Display PCB is installed on the front panel of the plasma cutting machine. The PCB is connected to the machine's control board via a ribbon cable. The PCB is also connected to the interlock switches via a separate cable.

Troubleshooting

If the interlock system is not working properly, the following steps can be taken to troubleshoot the problem:

1. Check the interlock switches to make sure that they are properly installed and functioning correctly.
2. Check the ribbon cable between the PCB and the control board to make sure that it is properly connected.
3. Check the cable between the PCB and the interlock switches to make sure that it is properly connected.
4. If the problem persists, the PCB may be faulty and will need to be replaced.

Conclusion

The Hypertherm 041149 Interlock Display PCB is an important part of the interlock system on Hypertherm plasma cutting machines. The PCB is responsible for monitoring the status of the interlock switches and displaying the interlock status on the machine's control panel. If the interlock system is not working properly, the PCB may be faulty and will need to be replaced.

Similar Parts

PCBS-0125
PCB, Assy, Display Inverter-TFT 12 Volt for DISP-0018

228594
KIT:ARCGLIDE MOTOR CONTROL CNC INTERLOCK

029514
HT-2000 I/O PCB PCB-8

141033
Cooler Sensor Board PCB HRP 400 XD

041837
PCB ASSY:HPR130/260 I/O

141024
PCB Assy HPR HD4070 PC104 with Hi-Performance

128408
KIT: C THC Plasma Intrface PCB

041920
PCB Assy HPR HD4070 PC104

PCBS-0143
Assy, Touchstone Video Controller PCB PCI use with DISP-0018

128407
KIT: C-THC Cont. PCB Repl.