Hypertherm 028547 Shielded Leads Between Power Sup. & Torch - 50 ft.

Product Description

The Hypertherm 028547 Shielded Leads Between Power Sup. & Torch - 50 ft. is a high-quality replacement part for Hypertherm plasma cutters. These leads are designed to connect the power supply to the torch, and they are shielded to protect against electrical interference. The leads are 50 feet long, which provides ample reach for most applications.

Features

• High-quality replacement part for Hypertherm plasma cutters
• Shielded to protect against electrical interference
• 50 feet long for ample reach

Compatibility

The Hypertherm 028547 Shielded Leads Between Power Sup. & Torch - 50 ft. are compatible with the following Hypertherm plasma cutters:

• Powermax30 XP
• Powermax45 XP
• Powermax65 XP
• Powermax85 XP
• Powermax105 XP
• Powermax125 XP

Installation

The Hypertherm 028547 Shielded Leads Between Power Sup. & Torch - 50 ft. can be installed by following these steps:

1. Disconnect the power supply from the torch.
2. Remove the old leads from the power supply and the torch.
3. Connect the new leads to the power supply and the torch.
4. Tighten the connections.
5. Reconnect the power supply to the torch.

Troubleshooting

If you are experiencing problems with the Hypertherm 028547 Shielded Leads Between Power Sup. & Torch - 50 ft., please check the following:

• Make sure that the leads are properly connected to the power supply and the torch.
• Check for any damage to the leads.
• If the leads are damaged, replace them with new ones.

Conclusion

The Hypertherm 028547 Shielded Leads Between Power Sup. & Torch - 50 ft. are a high-quality replacement part for Hypertherm plasma cutters. These leads are designed to provide long-lasting performance and reliability.