Hypertherm 027005 Coolant Filter

Product Description

The Hypertherm 027005 Coolant Filter is a genuine OEM replacement part for Hypertherm plasma cutting systems. This filter helps to remove contaminants from the coolant, which can help to extend the life of the system and improve cut quality. The filter is easy to install and can be replaced in minutes.

Specifications

• Brand: Hypertherm
• Part Number: 027005
• Description: Coolant Filter
• Dimensions: 3.5" x 2.5" x 1"
• Weight: 0.5 lbs.

Features

• Genuine OEM replacement part
• Helps to remove contaminants from the coolant
• Extends the life of the system
• Improves cut quality
• Easy to install

Installation

To install the Hypertherm 027005 Coolant Filter, follow these steps:

1. Turn off the plasma cutting system and disconnect the power cord.
2. Open the coolant reservoir.
3. Remove the old filter.
4. Insert the new filter into the reservoir.
5. Close the coolant reservoir.
6. Reconnect the power cord and turn on the plasma cutting system.

Maintenance

The Hypertherm 027005 Coolant Filter should be replaced every 6 months or 1,000 hours of use, whichever comes first. To clean the filter, simply remove it from the reservoir and rinse it off with water.

Troubleshooting

If you are experiencing problems with your Hypertherm plasma cutting system, the coolant filter may be clogged. To troubleshoot the problem, follow these steps:

1. Turn off the plasma cutting system and disconnect the power cord.
2. Open the coolant reservoir.
3. Remove the coolant filter.
4. Inspect the filter for signs of clogging.
5. If the filter is clogged, clean it with water.
6. Reinstall the filter and close the coolant reservoir.
7. Reconnect the power cord and turn on the plasma cutting system.

If the problem persists, contact Hypertherm customer support for assistance.

Warranty

The Hypertherm 027005 Coolant Filter is backed by a 1-year warranty. For more information, please see the Hypertherm warranty policy.