Monthly Basis
What's happening this month?

Hypertherm 026013 O-Ring

Part Description

O-Ring, silicon, .426 X .070

Specifications

Material: Silicone Size: .426 X .070

Applications

This o-ring is used in various Hypertherm plasma cutting systems, including the Powermax45 XP, Powermax65 XP, and Powermax85 XP.

Installation

  1. Remove the old o-ring from the plasma cutting torch.
  2. Clean the area where the o-ring will be installed.
  3. Apply a thin layer of lubricant to the new o-ring.
  4. Install the new o-ring in the plasma cutting torch.
  5. Tighten the o-ring until it is snug.

Troubleshooting

If the plasma cutting torch is leaking air, the o-ring may be damaged or installed incorrectly. Check the o-ring and replace it if necessary.

Safety Precautions

Always wear safety glasses when working on plasma cutting equipment. Do not touch the plasma cutting torch when it is turned on. Allow the plasma cutting torch to cool down before servicing it.

Part Number

Hypertherm 026013

Similar Parts

026020
177902 O-Ring, silicon, .864 X .070

026015
O Ring: Silicon .551 x .070

026033
O Ring; Silicon 1.989 x .070

026026
O-Ring, silicon, 1.239 X .070

026520
O Ring; silicon .332 x .031

044012
O-RING:BUNA-N 70 DURO .364 X .070

044033
O-RING:BUNA-N 70 DURO 1.989 X .070 for 220747

026019
O-Ring, silicone, 70 duro, .801 X .070

044031
O-RING:BUNA-N 70 DURO 1.739 X .070

C107-153
Retaining Cap, 30/50/070 Amp, MS/SS/AL