Hypertherm 026009 O-rings for Bullets

Part Information

• Brand: Hypertherm
• Part Number: 026009
• Description: O-rings for Bullets

Application

These o-rings are used on Hypertherm's line of plasma cutting torches.

Specifications

• Material: Buna-N
• Durometer: 70
• Temperature Range: -40°F to 250°F (-40°C to 121°C)

Installation

1. Remove the old o-rings from the torch body.
2. Clean the o-ring groove and the torch body.
3. Apply a thin coat of lubrication to the new o-rings.
4. Install the new o-rings in the torch body.
5. Tighten the torch body screws.

Maintenance

Inspect the o-rings for wear or damage before each use. Replace the o-rings if they are worn or damaged.