Hypertherm 024205 Hose Assy: Oxygen, 7.5 m/25 ft

Product Description

The Hypertherm 024205 Hose Assy: Oxygen, 7.5 m/25 ft is a high-quality replacement part for your Hypertherm plasma cutting system. This hose assembly is made of durable materials and is designed to withstand the rigors of everyday use. The hose assembly is 7.5 meters (25 feet) long, giving you plenty of reach to move around your workspace.

Features

• High-quality replacement part for your Hypertherm plasma cutting system
• Made of durable materials to withstand the rigors of everyday use
• 7.5 meters (25 feet) long for plenty of reach

Compatibility

The Hypertherm 024205 Hose Assy: Oxygen, 7.5 m/25 ft is compatible with the following Hypertherm plasma cutting systems:

• Powermax30 XP
• Powermax45 XP
• Powermax65 XP
• Powermax85 XP
• Powermax105 XP
• Powermax125 XP

Installation

The Hypertherm 024205 Hose Assy: Oxygen, 7.5 m/25 ft is easy to install. Simply follow these steps:

1. Turn off your plasma cutting system and disconnect the power cord.
2. Disconnect the old hose assembly from your plasma cutting system.
3. Connect the new hose assembly to your plasma cutting system.
4. Tighten the fittings on the hose assembly until they are snug.
5. Reconnect the power cord to your plasma cutting system and turn it on.

Troubleshooting

If you are experiencing problems with your Hypertherm 024205 Hose Assy: Oxygen, 7.5 m/25 ft, please refer to the following troubleshooting tips:

• Check the fittings on the hose assembly to make sure they are tight.
• Make sure the hose assembly is not kinked or damaged.
• If the problem persists, contact Hypertherm technical support for assistance.

Conclusion

The Hypertherm 024205 Hose Assy: Oxygen, 7.5 m/25 ft is a high-quality replacement part for your Hypertherm plasma cutting system. This hose assembly is made of durable materials and is designed to withstand the rigors of everyday use. The hose assembly is 7.5 meters (25 feet) long, giving you plenty of reach to move around your workspace.