Hypertherm 023847 Cable

Part Description

The Hypertherm 023847 cable is a cable that connects the PS (power supply) to the Machine Comp. I/O interface. This cable is used to transmit data and power between the two devices. The cable is 6 feet long and has a 9-pin connector on each end. The 023847 is also known as the PS/MC I/O cable.

Compatibility

The Hypertherm 023847 cable is compatible with the following Hypertherm power supplies:

• Powermax45XP
• Powermax65XP
• Powermax85XP
• Powermax105XP
• Powermax125XP

The cable is also compatible with the following Hypertherm machine control interfaces:

• CNC45XP
• CNC65XP
• CNC85XP
• CNC105XP
• CNC125XP

Installation

To install the Hypertherm 023847 cable, follow these steps:

1. Disconnect the power supply from the machine control interface.
2. Connect the 023847 cable to the PS port on the power supply.
3. Connect the other end of the 023847 cable to the Machine Comp. I/O port on the machine control interface.
4. Reconnect the power supply to the machine control interface.

Troubleshooting

If you are experiencing problems with the Hypertherm 023847 cable, check the following:

• Make sure that the cable is properly connected to both the power supply and the machine control interface.
• Check the cable for any damage.
• If the cable is damaged, replace it with a new one.

If you are still experiencing problems, contact Hypertherm technical support for assistance.