Brand: Hypertherm Part number: 123077 Part description: Cable between Gas Csl and PS
This cable is used to connect the gas console to the power supply.
This cable is compatible with the following Hypertherm plasma cutters:
To install this cable, simply connect one end to the gas console and the other end to the power supply.
If you are experiencing problems with your Hypertherm plasma cutter, this cable may be the cause. Check the cable for any damage, such as cuts, abrasions, or exposed wires. If the cable is damaged, replace it with a new one.
028687
Shield Gas Hose Set - Gas Csl/RHF Csl 30 ft.
028627
Leads-Gas Csl/Mtr Valve Csl, 35 ft.
128128
Leads between PS and RHF Csl 120 ft.
028688
Shield gas hose set between Gas Console and PS, 35 ft.
023609
Cable Between Gas Console and Power Supply, HT2000, 150 ft.
023757
Cable between Gas console and PS, 38 ft.
023963
Cable between gas console and power supply, 1x2/3x1 Ht2000, 115 ft.
023608
Cables between gas console and power supply, 1x2/3x1, 100 ft.
028625
Leads between Gas Console and Torch, 25'
028624
Leads between Gas console and Motor Valve console, 20 ft.